Wire identification on emanage harness

[deangtturbo]

Could somebody let me know what the yellow wire(second terminal from the right, top row) and the purple wire(first terminal from the right, bottom row) arrowed in the pic are for. I think the yellow wire can be used for wideband o2 sensor, am i right? A full list of what the terminals for the emanage harness plug would be very usefull. Sory for such a small attached pic but its the best i could do to be able to post it up with the file size restrictions. I cant understand what they are from the greddy instructions.

[Dzaster]

The yellow wire is v-tec solenoid and the other harness two wires are for ignition timing--that's what the second harness is.

And for manuals see HERE (http://www.greddy.com/tech/)

That is Greddy's site.

Oh, and yes, the yellow wire does wideband and I uploaded a 3rd party software in our downloads section called Emanagetools that allows dataloggin with wideband included.

I actually finally got my turbo project up and running today and first time a at it all turbo, emanage, swaps, and I am thankful that this place exists.

I'm gonna upload some datalogging files to see if someone can help me figure out what I need to do to get things right.

[Accord2nrz]

I have finally uploaded both manuals to the downloads section.

[omegaman]

As I have a narrowband O2 sensor and W/B Sensor. N/B is connected to the ECU, does the W/B connect straight to the EMB yellow wire?
is that what you saying?. for dataloggin.

[RPW00Mirage]

check my mirage emanage thread for instructions on how to hook up your wideband o2 to the emanage for datalogging.

[omegaman]

checked it out, great pics.
will attempt.
cheers

[RPW00Mirage]

oh!

in the e-manage parameters you have to set the boost input to use wideband o2. if i get a chance i'll plug in and screenshot that also.

[omegaman]

ah., great this will help.
cheers.