PDA

View Full Version : A/F ratio harness

rhythmnsmoke
03-07-2009, 03:14 PM
I have the Emanage Ultimate, and just picked up the A/F ratio harness. The harness has two wires coming out of it, one white, and one dark grey. Dumb question here, but I assume the Dark Grey wire is for ground correct?
Accord2nrz
03-07-2009, 03:29 PM
The White is your signal wire, the Grey is your ground wire :) Welcome btw. Post an intro :)
rhythmnsmoke
03-07-2009, 03:31 PM
That's what I figured, thanks man. Intro is coming soon. I'm building a Time Attack tC. Running Redline Time Attack this season, so I have a good number of pics. Give me a little bit and I'll make an intro thread.
Accord2nrz
03-07-2009, 03:32 PM
a Time Attack scion! That sounds absolutely sick man. I can't wait to hear how it does on the track.
Accord2nrz
03-07-2009, 03:34 PM
Also if you could, and time permitting of course. Save the gsc file for your tune and upload it to the downloads section to include your setup in the description so if someone with something similar comes along down the timeline can build off your accomplishment. :)
Dzaster
03-07-2009, 05:42 PM
A done up tC! Sweet! There is a member on the forum I'm at who doesn't own a Tercel anymore but a tC now, and he has his nicely modded as well. They are nice vehicles.
rhythmnsmoke
03-07-2009, 11:55 PM
About to make my intro thread guys. Swing over there to see my build going on. The kit that I am getting made 370-400whp on a stock motor tC with Meth injection. And later they built the motor reved it to 7800rpms, and now makes a little over 500whp. This is on a Dyno Dynamics dyno, not high reading dynojet. This tC I'm talking about is also a Time Attack tC, and won the Redline Time Attack for the FWD Modified class last season.