Greddy volt-psi-Kpa conversation chart

[elderc]

I found this coversation chart on another site, thought it might be helpful I used it to convert volts to psi for my Greddy map sensor.

[Accord2nrz]

awesome find, If I recall there was also a chart floating around to convert PSI to KPa etc... If someone can find that then it would greatly benefit the community. I dont have the time to search it out while setting up other nifty issues.

[elderc]

This is a link to a site in Canada : just enter what you want to convert and it will calculate it for you !

http://convert.web-max.ca/index.php?select=100&page=2

[Dzaster]

Forgive the n00bness, but what would this coversion chart beused for?:confused:

[elderc]

The Greddy MAP sensor (on the EMB) displays in volts on your emanage this allows you to convert the voltage sig. to a usable psi or Kpa. so you will be able to control fuel and timing while under boost. Its just a more accurate way to tune.

[Dzaster]

Oh, good to know as I have and will be using the Greddy MAP sensor. I guess I just assumed it would display in PSI. Thanks

[Dzaster]

I see the use of this, but the chart has 4 and 2 bar maps, what about 3 bar since that is what the Greddy MAP is right?

Edit: I think I got it, but don't mind if someone still wants to explain to confirm. Thanks.

[Accord2nrz]

What was it you were needing explained? I'm a tad lost =)

[Dzaster]

It was just that the Labeling on the top of each column there is not 3bar MAP and that is what the Greddy is sold as so I thought that there was no 3bar conversion. However, I got it eventually, its teh 4bar Greddy MAP.