Got me an emanage learning...

[eddy_amaya08]

So I have a 4efte and I want to start learnig how to tune so I can later use it to put a bigge turbo on my car so I have an idea of how to wire the emange blue to my car but idk how to use it just yet I haven't gotten time to mess w the program I've tuned at school w hondata and also the mustangs software forgot what it's called but yeah I want to get really good at it tho uz I dnt want o blow my engine lol

[Kennymp3]

Welcome eddy:cool:
We will try and help you along the way.
Post up some pics of your car:D

[Accord2nrz]

Welcome to the site! Know anyone trying to get rid of a hondata chip ?

[eddy_amaya08]

Thanks guy and no dnt know Anyone and here is my carro
http://i643.photobucket.com/albums/uu151/eddy_amaya08/22a798d3.jpg

[eddy_amaya08]

Ok so I got the support tool it asked for the serial number to install not sure which it was so I put one that wad on the box and then I hooked up the emanage w USB and it didn't connect idk what to do??

[Accord2nrz]

In the support tool make sure you've updated to the latest version. It can be found here in the downloads area. Then make sure you COM port is set right. You find that by checking each one until you see the little "online" message in the bottom right hand corner of the support tool program.

Remember your ign has to be switched on (w/ out the car running) for the emb and the computer to talk.

[eddy_amaya08]

So I made myself this jumper harness then just have to wire the emanage and fcd to it :)
http://i643.photobucket.com/albums/uu151/eddy_amaya08/87b4b5e3.jpg

[eddy_amaya08]

Ok so I got the emange wired into the jumper harness now it dosent want to start do I have to set base map or something??

[Dzaster]

Eddy, are your rotary and jumpers set correct? For our cars the rotary dials should be set to 2-4-0.

Those ratary dials are the 1,2,3 dials on the left in this pic.

http://i525.photobucket.com/albums/cc340/dzaster96799/Tuning/rotaryswitchid.png





For the jumpers they are pins on the circuit board that you have to bridge with a "jumper"(supplied). You wanna follow the ones in the box for our cars.

http://i525.photobucket.com/albums/cc340/dzaster96799/Turbo/eManage/Jumpers-1.png




You don't need a based map unless your injectors are ridiculously large and thus flooding out your motor. If you do have large injectors then yeah you'd wanna at least have the Injector Auto Correct fuction set. However, if you have a totally different type of cars map loaded on there then that could definitely cause your car to not run right or run at all.

[eddy_amaya08]

Oh ok got it and they weren't set to that but now it is so next time I try to start it with it connected it's should be ok right??

[Dzaster]

Probably. What car was the EMB in previously? Either way, I wouldn't drive with another car's tune on it. Zeroed/black map maybe.