Emanage and MX5 help please

[Fluke]

I have just finished putting together a harness for my emanage blue. When I fit the harness the car will crank over but it just wont start. I have checked the wiring and it all seems correct, but can somebody confirm that the injectors are supposed to be connected individualy or do you splice the 1 & 3 and 2 & 4 injector wires together? I have read the idiots guide to set up a the emanage on a 1.6 and injectors were wired in pairs?

Here is how I have the emanage connected to the ECU.

http://premium1.uploadit.org/yan816//96-97--Emanage-Wiring.jpg

The rotarty switches have been set as 3 A 3.

[Accord2nrz]

Make sure that your inj earth and ecu earth are wired together. That way you can be Sure they are getting good signals. Then make sure you ign wire is set right. I think your injectors are wired right if you went by the manual. If not I suggest you download from this site and double check your wiring. Hope this helps.