Check out my BIKE.

[ND_Neon_Guy]

OK guys here it is my bike.

LOL
http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs389.snc3/23718_108807995802825_100000208758900_232142_41673 _n.jpg

Yeah I got it the other day. it needs a couple things to get it running right mainly a pull start assembly. :)

[Kennymp3]

Sweet pocket bike:D
Those things are fun.

[Turbineguy]

Better get some knee sliders.:)

[Kennymp3]

Get it running yet?
Last summer I picked up an mini chopper for cheap at a garage sale.
I had to rewire it as the kid that owned it tore it all apart. I still got the thing
running the same day. I see those pocket bikes on craigslist all the time.......maybe I should buy one:D

[ND_Neon_Guy]

Hey thanks, I ordered some parts from PocketBikeParts.com. Hopefully all the stuff I ordered Will get it running. Here's a list of what all I got.
-Chain - 25H - Cag - 18.5" inch or 144 links
-Fuel Line Filter
-Gasket - Carburetor, Cag
-Ignition Coil - 47-49cc Cag
-Pull Start - Cag, Aluminum - Black
-Foot Peg Set - Aluminum - Chrome (round peg)
-Windshield
I found out that the chain on it was broken after a closer look at it. I figured why not since I have to take the bike apart anyways lets go ahead and get the fuel filter. There was also alot of fuel/oil buildup around the carb and everything so I cleaned that all out and went ahead and ordered the gasket to go there. I went ahead and got the new ignition coil figured it wouldn't hurt. The pull start was broke when I bought it, the guy said that is all it needed. I also found out that one of the foot pegs was like J/B Welded together or something. I also had to get a new windshield because there wasn't one on the bike. It should all be here soon I'll post in progress pictures of me painting the bike and fairings before the parts get here, and some video of me on it. :)

As for knee sliders I'll probably get some of those later I"m gonna make sure I can get it going first. I'll probably mess up a few sets of ACUs on the way to work.

[Dzaster]

Nice!

I know its kinda of a joke compared to those, but there is the electric razor pocket bikes. I bought and modded one. Put on 4 batteries, two motors on a single chain, and 2 ESC's wired into the same throttle. Thing was pretty decent getting me around campus. Maybe 30mph topspeed and would eat up campus security in their carts. I had a 6'11" friend of mine ride it and a girl gribble on it going slow and just wobbled until she fell--unscaved. lol

Its really to low for my taste as there is no a whole lot you can do at that height to save your sin if going down.

[Accord2nrz]

lolz i love seeing those things motoring around. Especially at car shows.

[Turbineguy]

Add nitrous.

[92paseobuild]

yeah. i was looking at gettin one when i was in college

[ND_Neon_Guy]

How exactly does the nitrous for these things work is it the same as cars. I thought about a mini turbo but I don't think I'm gonna be able to find one that small.

[Accord2nrz]

an engine is an engine. I'd imagine its the same.

[Kennymp3]

How exactly does the nitrous for these things work is it the same as cars. I thought about a mini turbo but I don't think I'm gonna be able to find one that small.
Smallest turbo I can find.......
http://cgi.ebay.com/ebaymotors/MOTORCYCLE-QUAD-RHINO-Turbo-BIKE-SEADOO-Small-IHI-RHB31_W0QQcmdZViewItemQQhashZitem5d26e742ecQQitemZ 400084648684QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAc cessories
And here is a mini nitrous kit.......
http://cgi.ebay.com/ebaymotors/ATV-Quad-Sneaky-Pete-Mini-Nitrous-Kit-w-5-NOS-Refills_W0QQcmdZViewItemQQhashZitem4a97f050baQQite mZ320376688826QQptZMotorsQ5fATVQ5fPartsQ5fAccessor ies

[ND_Neon_Guy]

OMG that turbo is so gonna get purchased here in a few months. :D That nitrous wouldn't be too bad either so I might be getting that too.

Here is a picture of the frame after paint.
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs388.snc3/23673_109200305763594_100000208758900_242529_81641 4_n.jpg

Next up is gonna be the bodywork and wheels. I might just buy some new wheels.

[ND_Neon_Guy]

I had a question about the above mentioned Turbo it has the locations for oil and water. Now here is my problem the motor on the bike is 2-stroke no oil and no antifreeze so what do I do? any help would be great I thought maybe having to put like a quart of oil on the bike somewhere and just making so that it somehow recirculates through the turbo and into an oil cooler. I also thought about throwing in some Royal Purple Because it is awesome. When I say throwing in some royal purple I mean capping off both side of the turbo with Royal Purple in it. Do I even need to be hooking that stuff up since its only on the pocket bike.

I looked into the nitrous, not gonna be too fun when I run out of nitrous the only way to do it is go wet. Which involves a whole lot of other junk. The reason is if I go dry which is cheaper I have to richen the fuel mixture to the motor ALOT so the nitrous will mix well, and not detonate my motor. So when its too rich it will run like crap. So I'm gonna do the Turbo and yes I might even put a little boost gauge on it. :D

[mgrotel]

wet kit it!!!

[ND_Neon_Guy]

wet kit it!!!

nah too much work for now I'm probably gonna try and do the turbo thing.

[Kennymp3]

If that turbo works out for you ND, I might have to follow your lead:D

[ND_Neon_Guy]

I've been looking into it and wow. What I was pondering in the back of my head was right. You know how a 2 stroke motor works right. When the piston moves up and down there is a point in time where the intake and exhaust ports are open together. So if you have boost it will push some of that new fuel out the exhaust causing you to use a lot more gas that your actually wasting. So I'm still wondering how I'm gonna do this.

[ND_Neon_Guy]

OK So I got my parts in the mail the other day.

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs414.snc3/24981_109329745750650_100000208758900_244702_53943 27_n.jpg

Here it all is put on the bike with my awesome headlights and tail light that I put on there too. It wasn't required but it does look really cool. :)

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs434.snc3/24981_109330072417284_100000208758900_244708_24065 54_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs434.snc3/24981_109330052417286_100000208758900_244707_55509 56_n.jpg

It goes pretty fast too. I'll get some better video of it but here is a crappy video of the first drive.

<object width="304" height="400" ><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://www.facebook.com/v/109286662421625" /><embed src="http://www.facebook.com/v/109286662421625" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="304" height="400"></embed></object>

[Kennymp3]

Crap....Video doesn't work for me:mad:
What size motor is in that ND? 49cc or so?
I have been looking for one on craigslist.:cool:

What did you pay for your's ND? If you don't mind me asking.\
Your bike looks the part man....:D

[ND_Neon_Guy]

Yes the motor in mine is either a 47cc or a 49cc not a 100% sure. You get the pocket bike like mine on the internet for about 200 before shipping I'll have to find the site again.

I paid 100 usd but it needed a new pull start(thats what the guy said) I went ahead and ordered some extra stuff like the chain, windshield, foot pegs, carb gasket, and fuel filter including the the new aluminum pull start housing. It was a total of about 115 usd. Then the headlight and tail light cost 15 usd total. They were for a bicycle.

As for the turbo I went and asked a guy who has a 2 stroke scooter with alot of stuff done to it and he said that putting a turbo on it is next to impossible so I'm gonna save up and get the 110cc 4 stroke and then I might put a turbo on that. Until then though I'm gonna try and get this carb tuned right.

[Accord2nrz]

too funny, you putting some LEDs on it? I know you are ;)

[ND_Neon_Guy]

too funny, you putting some LEDs on it? I know you are ;)

Didn't you look at the pictures. Dual LED Headlights. LOL and yeah to keep my Neon_Guy status I'm gonna have to put a small generator on it or something then load it up with lights.

[Kennymp3]

Yes the motor in mine is either a 47cc or a 49cc not a 100% sure. You get the pocket bike like mine on the internet for about 200 before shipping I'll have to find the site again.

I paid 100 usd but it needed a new pull start(thats what the guy said) I went ahead and ordered some extra stuff like the chain, windshield, foot pegs, carb gasket, and fuel filter including the the new aluminum pull start housing. It was a total of about 115 usd. Then the headlight and tail light cost 15 usd total. They were for a bicycle.

As for the turbo I went and asked a guy who has a 2 stroke scooter with alot of stuff done to it and he said that putting a turbo on it is next to impossible so I'm gonna save up and get the 110cc 4 stroke and then I might put a turbo on that. Until then though I'm gonna try and get this carb tuned right.
You stole that pocket bike at that price....most the ones on craigslist here
run around $300-400.
Man that sucks the turbo wont work with the 2 stroke motor:(
I have a 4 stroke 49cc mini chopper maybe I should buy that turbo and
boost it...:cool:
Guess I will have to research it a bit more.

[ND_Neon_Guy]

you should do it. now you have to tap into the motor and get oil to the turbo.