anyone has had this problem??

[marco-ir]

ok, so after a 2 week battle in connectin the emb to my computer, i started my tune, the problem i have now is that when im driving my car my wideband shows acceptable numbers, but as soon as i left the gas pedal and brake to make a completly stop my car either or goes very low on rps (200-400) or it dies. how can i fix this problem? is it timing ??
oh yeah my car is a 2.0 runnin 6 lbs and 440cc injectors

[Accord2nrz]

Is your car running off a map sensor? I've had the problem after boosting then the car acts crazy and even dies once it gets down to idle. The problem was the map sensor itself not being able to handle the boost. Do you have a missing link or check valve inline with the map sensor?

[bluelancer200283]

it might be firmware issue my car done that and got a recall code and since i got it fixed no problems

[Accord2nrz]

Any update on what's going on with this situation?

[marco-ir]

hehe sorry i was out of town and my wife just did let me touch any electronic device.
i still have the problem, but at least after 2 hrs thinkin of what i reduce the problem, i checked my ignition timing and it was a lil retarded, i dont know why if i didnt touch the ingnition, so i set it to 0, what im goin to do next its connect a lil box i found for my car that "tricks" my ecu about the reading on the manifold absolute pressure, may be thats why my idle its kind of roughly
and hopelly as u accord thas my problem :cool:

[Accord2nrz]

let's hope. If not let me know what it does/ doesn't do.