E-Manage Blue to Gold questions

[ian_s14]

First off id like to give props for a awesome site! Gettin down to business, do u have to perform the hardware modification (shorts and jumper) to the E-Manage Blue get the newer (E-Manage Gold) software to work properly? (version 1.49) I have the AEM UEGO wideband 02 sensor and i want to do some data logging. Ive read that you can connect it using the 2nd Air Flow Sensor input on the E-Manage or you can hook it up using the Boost Port (If not being used by a Boost Controller or a MAP sensor etc). Is there any advantage to one over the other? I have found E-Manage Tools and have gotten it to run with the 1.1 Net Framework although i have not used it yet. Is this the best way to datalogg? If you choose to use the Boost Port here is a helpful link for making a plug that i came across. Floppy Plug (http://hondaswap.com/ecus-electronics-tuning/how-datalog-wideband-connected-your-emanage-161660/) Thanks

[Dzaster]

I've not used the boost port because I need the boost port to run the Greddy MAP sensor. I've also used the Emanage Tools software and it was cool, but for me, it was off quite a bit--haven't heard of too many other's that have had that problem. The Emanage Tools output file is incredibly easy to reference. However, some vitals aren't logger with it--ignition and injector duty cycle.

As for the Blue to Gold, I thought of trying it, but from what it looks like the newest Blue software is the Gold or near Gold anyways.